Homepage A.A.S Spectrophotometers

The XYZ Autosampler

The XYZ Autosampler is an advanced intelligent autosampler for Graphite Furnace, Flame, and Vapour Generation analysis. The freedom of movement in all dimensions permits versatility not attainable with other conventional rotary type Autosamplers. It is flexibile and can be used with most types of sample container.

The XYZ Autosampler can utilise:

• Microplates
• Standard test tubes
• Graphite furnace sample cups
• Custom selectable GF sample sizes from 1 to 150µl

The capabilities of the Autosampler are also enhanced by the AISPEC™ consumables

The AISPEC™ consumables allows the user to:

Calibrate from a single standard:
The digital micro volume pump automatically dilutes a master standard for calibration and standard addition.

It allows for an easy dilution process that brings any out-of range sample into the calibration range.

Have on-line sample preparation:
The table driven command allows the use of any volume combinations of: sample, standard, modifier and blank solutions in any sequence to accommodate the requirements for method development and quality control.

Use Aurora's fast dry furnace techniques:
This is made possible by individual user control of cooling time, preheating of temperatures and injection speed.

By using preheating and cooling levels of <150 degrees Celsius, fast cycle times of less than 20 seconds are achieved.

This equates to sample injections and furnace runs of over 3 samples per minute

.Return to Top of Page

Return to Home Page