Steroglass ION 3 Potentiometric Stripping Analyser

GENERAL DESCRIPTION (Page 3 of 3)

USER FRIENDLY consumables

The NEOTES consumables enables the end user to easily set up STEROGLASS potentiometric stripping technique applications.

While respecting GLP regulations, NEOTES allows the operator to control the unit while automatically performing all of the mathematical equations needed to compute the unknown concentration of the metals that can be detected in the sample.

The consumables offers detailed control and sample analysis reports. Concentration can be statistically analysed and maintenance can be planned while controlling the analytical performance as time elapses (control charts). The procedures implemented by NEOTES allow the user to easily set and modify the analysis parameters.

The consumables is equipped with a Standard Windows graphical interface and has been designed to fully exploit the potential of 32 bit operating systems and the new powerful micro-processors.

SPECIFICATIONS

General Specification	Power Supply: 115-230Vac +/-10% 40-60 Hz 30VA Dimensions (W x L x H): 310 x 230 x 350 mm Weight: 8.5 Kg
Electrical Specification	Current Ranges (3 electrode potentiostatic / galvanostatic system): Four current ranges from +/-100uA to +/- 100nA auto-ranging Resolution: 12 bit (referred to the full-scale value)
Communication	Opto-isolated interface - RS232 C9 pin
Cell System	Sample cell material: borosilicate glass (PTFE available on request) Stirrer: Computer controlled constant speed Stirrer material: Borosilicate glass Purging and blanketing system: Two-way automatic gas bubbler system
Electrodes	Type: 8 mm glass or PTFE-bodied with standard N6 conical joint Reference Electrode: Ag / AgCl Counter Electrode: Platinum wire Working Electrode: Glassy carbon (V-10 grade)
Minimum PC Requirements	Processor: Pentium® II 266MHz (Pentium®III suggested) System Memory: 32 Mb RAM (64 Mb or more sII 266MHz (Pentium®III suggested) System Memory: 32 Mb RAM (64 Mb or more suggested) Hard-disk free space: About 40 megabyte CD-ROM unit: 32x or more Serial Port: COM1 Monitor: VGA monitor (640x480x16) Printer: Any Windows compatible printer Operating System: Microsoft® Windows