Homepage 
Analytical Instruments
Jenway PFP7 Industrial Flame Photometer
|
|
|
|
|
|
|
|
The Jenway Model PFP7 is a low temperature, single channel Flame Photometer, designed for the routine determinations of Sodium (Na) and Potassium (K). Additional filters are available for the measurement of Lithium (Li), Barium (Ba) and Calcium (Ca).
The instrument is fitted with automatic flame failure detection for user safety, making it ideal for use in clinical, industrial and educational applications.
The Model PFP7 is designed specifically for use in Industrial applications.
There is also an clinical version of this instrument, the Model PFP7C
| Limits of Detection | Na <=0.2ppm / K <=0.2ppm / Li <=0.25ppm / Ca <=15ppm / Ba <=30ppm |
| Reproducibility | <=1% / Coefficient of Variation for 20 consecutive samples using 10ppm Na set to read 50 |
| Linearity | Better than 2% when concentration of 3ppm Na and K and 5ppm Li are set to read 100 |
| Specificity | Interference from Na, K and Li equal in concentration to test element will be >0.5% |
| Recorder output | Nominal 1.00V for a reading of 100.0 |
| Services: Electrical | 90-125V or 190-250V @ 50/60Hz |
| Services: Air | Moisture and oil free 6 litre/minute @ 1Kg/cm2 (14psi) |
| Services: Fuel | Propane, Butane, Natural Gas or LPG |
| Size | 420 x 360 x 300mm |
| Weight | 8Kgs |
ORDERING INFORMATION
|
500 094 |
Model PFP7 supplied with Na & K filters, connecting hoses and clips, compressor plug, drain trap, fuses, mains lead and combined Instruction/Service manual |
A number of additional accessories are available for the Flame Photometer range, including additional filters / regulators and a selection of clinical and industrial standard solutions.
