|
General
The Interspec 200-X series of FTIR spectrometers represents a cost effective Fourier Transform Infrared Spectrometer and employ a number of unique features that ensure high performance from a compact instrument. The Interspec 200-X measures just 59 X 39 X 19 cm and is regarded as one of compact and versatile infrared FTIR spectrophotometers. The design of the 200-X is unique both in terms of optical design and the software and firmware designed specifically to significantly reduce overall analytical times. The interferometer geometry is employing a new compact Michelson self compensating optical system that eliminates many of the optical alignment problems found in conventional type optical interferometers. The Interspec 200-X design avoids the use of conventional corner cube optics and dynamic alignment. In practice this means that the instrument can be used in the Research or QC laboratory , in any industrial or university environment and if required, can also be used outside of laboratories in remote locations.
Interferometer Performance
All Interspec FTIR instruments offer high S:N ratios and can provide SNR up to 12000:1. Resolution in the infrared is available 2 cm-1 and programmable up to 32 cm-1 (option 0.5 and 1 cm-1). The overall wavelength range is 7000 to 400cm-1 (IR) or 15000 to 3850 cm-1 (NIR).
The Sample Compartment
As you will see the sample compartment is large indeed and can accommodate all of the normal sample handling requirements relating to FTIR spectroscopy. This unique compartment will also accommodate the wide range of accessories supplied by specialist accessory manufacturers. Overall dimensions are W20 X D24 X H15 cm . The optical axis is 74.5 mm above the base of the sample compartment and there is free space of 80 mm above the optical axis to the underside of the lid.
Extending Wavelength Ranges
In order to facilitate the use of a wider wavelength range the Interspec 200 X can be fitted with different beam splitters or detectors ( factory fitted at time of order ) thus allowing the instrument to work from 15000 to 400 cm-1.
Beam Splitters |
Range subject to coatings |
KBr |
7,000 to 400 cm-1 |
ZnSe |
5,000 to 500 cm-1 |
CaF2 |
10,000 to 1,000 cm-1 |
Quartz |
15,000 to 3,000 cm-1 |
Specifications
|
| Wavelength range, |
IR7000 to 400 cm-1 |
Wavelength range, NIR |
15000 to 3850 cm-1 |
Resolution, standard |
2 cm-1 (8 cm-1 - NIR) |
Resolution, option |
1.0 or 0.5 cm-1 |
Interferometer |
Self aligning |
Beam diameter |
30 mm |
Aperture ratio |
f 3.2 |
Beamsplitter, standard IR |
Multicoated KBr |
Beamsplitter, option |
ZnSe, CaF2, CsI |
Beamsplitter, standard NIR |
Fused Silica |
Frequency reference |
HeNe laser |
Emission port |
Option |
Sample compartment |
W20xD26xH16 cm |
Beam at sample |
10 mm dia. |
Accessories |
Ordinary FTIR accessories |
IR source |
High intensity air cooled |
NIR source |
Quartz-halogen lamp |
Detector, IR Standard |
low noise DLATGS |
Detector, IR Option |
MCT |
Detector, NIR |
Si, InGaAs photodiode |
Purge possibility |
Yes |
Operating system |
Windows 98/XP |
|
|
Power |
90-230 VAC, 12 VDC, 40 W |
Dimensions |
W59xD39xH19 cm |
Weight |
24 kg |
Environmental Temperature |
15 - 28 0C
Best below 65% |
Environmental Humidity
|
Detector Options
The standard detector is a selected high sensitivity DLATGS pyroelectric design providing the highest possible signal to noise for all but the most demanding applications. However there are many applications in infrared spectroscopy where high resolution analysis is required for materials with high absorption characteristics and for these applications cryogenically cooled MCT detector options are available each with a specific wavelength range.
In case of NIR spectral region two types of photodiodes are available: Si and InGaAs.
Software
Interspec for Windows software is supplied on CD and provided with each system shipped. The software includes features for all standard analytical requirements including manipulation of spectral data, instrument control, plot with preview on the screen plus many others. Also included are several facilities for analytical modelling of interferogrammes or spectra, with smoothing, and baseline correction, interactive editing and data manipulation . Also spectral subtraction, mixture subtraction, smoothing derivatives, plot with preview etc. Data input and output is possible in ASCII or JCAMP. Other commercial programmes can be used including Labcognition's Panorama software for features such as Library Search. The Interspec for Windows programme is written in 32 bit protected mode. Our unique software has been designed specifically for multi function applications. The utility of the Interspec for Windows programme can be extended by adding other commercial programmes such as search, component identification, Kramers Kronig Transform, Chemometrics, etc. to suit individual requirements.
Computer systems
Computers have to meet at least the following minimum specifications:
| Processor |
Pentium 900 MHz |
Memory |
512 Mbytes RAM |
Hard Disc |
40 Gbytes |
CD ROM |
Yes |
However other specifications are also possible subject to user requirements. The standard operating system is a Windows 98/XP platform. The computer can be ordered as a separate component with the instrument or the instrument can be interfaced to an existing computer providing it meets the specifications as defined.
Sample Handling Accessories
The applications for FTIR are extensive and more use is being made of these techniques now than at any other time. Many of these new applications can be attributed to the development of a very large and comprehensive range of sample handling accessories made available from many accessory companies . All such accessories can be used in the Interspec 200-X series of instruments. So no matter what your samples are, we are able to offer just the right sample mount including accessories for ATR accessories , specular reflection, diffuse reflection, DRIFT, photo acoustic, liquid sampling, gas cells, gas purge systems, hydraulic or hand held sample presses, film making kits, sample grinders, micro sampling, disposable cells, polishing kits, polarisers, plus a lot more.
Air Cooled Infrared Source
Our Infrared source is a long lifetime and trouble free operation device. The reason is simple in that our design achieves excellent wavelength emission characteristics and very high stability. The colour temperature of the source is about 12000C.
In the NIR region a quartz-halogen lamp is used.
Desiccated and Sealed Interferometer
The Interspec 200-X series of instruments employ a sealed, desiccated interferometer and detector compartment, ensuring high spectral integrity with low levels of water vapour within the interferometer. We also offer a version (200-XZ) that employs a ZnSe moisture insensitive optics to be impervious to water vapour and can be used to advantage in serious tropical environments. Provision is made for purging should this be of interest to the user. Near infrared version (200-XN) employs a fused silica optics and is insensitive to any influence of water vapour.
Models
Interspec 200-X - Standard FTIR Instrument with KBr optics.
Interspec 200-XZ - Non Water Sensitive FTIR Instruments for High Humidity with ZnSe optics
Interspec 200-XN - Near Infra Red Instrument with fused silica optics.
Return to Top of Page
Return to Home Page
|
F.T.I.R Spectrophotometers 
